Fujitsu iScanner fi-6010N Operator's Manual page 518

Code
12010001
12010002
12010003
12010004
12010005
482
Message
Scanned data size exceeded
maximum size allowed for
e-mail attachments.
Could not connect to server
when sending e-mail.
"From" address was rejected by
the server when sending e-mail.
"To" address was rejected by
the server when sending e-mail.
e-Mail size exceeded maxi-
mum e-mail size allowed by the
SMTP server.
Action
Try the following:
• Reduce the number of pages to be
scanned and send the e-mail in separate
parts.
• Select a higher compression level and
try again.
"6.8.9 Compression" (page 325)
If the problem persists, contact a system
administrator to check the "Maximum
Attachment Size" setting.
"4.7.11 Setting the e-Mail Server (SMTP
Server)" (page 100)
Try the following:
• Check that the LAN cable of the scanner
and SMTP server is connected properly.
• Contact a system administrator to check
that the scanner IP address and SMTP
server settings are correct.
"8.3 Network Connection
Troubleshooting" (page 388)
• Contact a system administrator to check
that the SMTP server is working prop-
erly.
Contact a system administrator to check
that the specified e-mail source address is
authorized for use on the server.
Contact a system administrator to check
that the specified e-mail destination
address is authorized for use on the server.
Contact a system administrator to check
the maximum e-mail size allowed by the
SMTP server.