Using The Network Settings Menus; Giving The Scanner An Ip Address - Fujitsu iScanner fi-6010N Operator's Manual

4.7

Using the Network Settings Menus

4.7.1 Giving the Scanner an IP Address

An IP address must be set in order to connect the scanner to a network.
1. Select the [Network Settings] tab on the top menu.
2. Select the [IP Address] tab on the left side menu.
⇒
The DHCP or IP address setting screen appears.
3. Select whether or not a DHCP is required.
Set the scanner's IP address. This may be done automatically, by pressing the DHCP [On]
button. By default, this is set as [On].
The IP address may also be set manually, by pressing the DHCP [Off] button and entering
the following numerical addresses:
•
IP Address
•
Subnet Mask
•
Default Gateway
76