Setting The Network Folders - Fujitsu iScanner fi-6010N Operator's Manual

4.7.14 Setting the Network Folders

Set a folder of the file server, or the FTP server, as a network folder.
Up to 100 network folders and FTP server folders can be added.
A network folder can be added in either of the following ways.
• Network Tree
Select a network folder from the network tree.
For details, refer to
• Network Path
Set a network folder by directly entering the path alias for the file server folder.
For details, refer to
• FTP Path
Set a network folder by directly entering the path alias for the FTP server folder.
For details, refer to
ATTENTION
"Registering a Network Folder (Network Tree)" (page
"Registering a Network Folder (Network Path)" (page
"Registering a Network Folder (FTP Path)" (page
Note the following when registering a network folder.
•
The network folder is registered as a network path. If the network folder is
on a Windows file server and the length of the full Windows path including
the file name exceeds 259 characters, the scan data will not be saved.
Before registering a (Windows) network folder, check that the length of the
full file path+name is not likely to exceed 259 characters.
•
If the selected folder was created using a language foreign to that of the
browsing operating system, the network folder may not register correctly. If
the name of the network folder contains unrecognizable characters, check
the codeset used.
•
If the number folders to be displayed is large, they may take a long time to
appear.
4.7 Using the Network Settings Menus
fi-6010N Network Scanner Operator's Guide
116).
119).
121).
115
4