Fujitsu iScanner fi-6010N Operator's Manual page 201

5. Select the [ ] button to the left of [Message Screen] to set whether or not to display
the actual "Message Screen".
For details about the "Message Screen" screen, refer to
sage Screen" (page
Enter a title and message text for the message shown on the "Message Screen".
"Title" may be up to 24 characters long.
"Message" may be up to 256 characters long.
The layout of the message displayed in the message screen settings,
ATTENTION
and the actual "Message Screen" layout in the scanner may differ.
Check the layout in the scanner and then enter the title and message
in the "Message Screen".
•
Whether or not the title and message set in "Message Screen" are shown
HINT
depends on whether the [Message Screen] button on the "Job Menu"
screen is [On] or [Off].
•
If a title or message is not set in "Message Screen", even if the [Message
Screen] button on the "Job Menu" is set to [On], the actual "Message
Screen" is not displayed.
352).
fi-6010N Network Scanner Operator's Guide
4.11 Setting Job Features
"6.13.1 Enabling/Disabling the Mes-
4
165