Cloning A Job Sequence; Editing A Job Sequence - Fujitsu iScanner fi-6010N Operator's Manual

■ Cloning a job sequence

This section describes how to clone a job sequence.
1. Select the [Job Sequences] tab.
⇒
The "Jobs List" window appears.
2. Select the job sequence to be cloned.
3. Select the [Clone] button.
⇒
The "Job Details" window appears.
4. Clone the detailed job sequence settings.
5. Select the [OK] button.
⇒
A job sequence is added to the "Jobs List" window.

■ Editing a job sequence

This section describes how to edit a job sequence.
1. Select the [Job Sequences] tab.
⇒
The "Jobs List" window appears.
2. Select the job sequence to be edited.
3. Select the [Edit] button.
⇒
The "Job Details" window appears.
4. Edit the detailed job sequence settings.
5. Select the [OK] button.
⇒
The settings of the job sequence are changed.
4.11 Setting Job Features
fi-6010N Network Scanner Operator's Guide
4
171