Fujitsu iScanner fi-6010N Operator's Manual page 302

3. Enter a file name for the scan data into the "File Name:" field.
File names may be up to 128 characters long, excluding the following symbols.
\ / : * ? " < > | { }
By default, "Scanner Name" + "Scan Date/Time" is entered.
ATTENTION
4. Check that address shown in the "From:" field is correct.
Direct input for this field is only possible if logged in with the guest account.
Enter a "From" e-mail address.
For details about the e-mail address settings, refer to
(page
If logged in with an account other than the guest account, the "From" input field is not
shown, but the user e-mail address registered with the LDAP server is set for this field.
5. Enter an e-mail title into the "Subject:" field.
The subject may be up to 128 characters long.
6. Enter the e-mail contents into the "Body:" field.
The body may be up to 512 characters long, including line feeds.
7. Select whether or not to request a return receipt.
If
266
The following file names cannot be used:
•
CON
•
PRN
•
AUX
•
CLOCK$
•
NUL
•
COM0 to COM9
•
LPT0 to LPT9
420).
is pressed and becomes
"B.1 e-Mail Address Setting Values"
, a return receipt will be requested.