[Back] Button - Fujitsu iScanner fi-6010N Operator's Manual

• Issue an Update Call
Select the checkbox to issue an update call.
When the checkbox is selected, even if a scanner is not started or logged in to, the update
module is sent and applied to the scanner according to the Scanner Notification Schedule.
However, if the update is released while logged in to a scanner, the update will be applied
after logged out. If any other available updates are pending, those are also applied at the
same time.
• Scanner Notification Schedule
Sets the schedule to notify update module.
• Now
Issues a call immediately.
• Later
Specifies the date and time to issue a call.
The default value is 00:00 of the following day. The value can be specified within the range
between the current time and a month later.
The scanner notification schedule uses the Central Admin Server timezone.
• [Register] button
Registers the uploaded update module.
When a new system update is available, it will only be installed in a scanner if
HINT the new version is higher than the current version. Targeted scanners are
restarted after the new system update has been installed.
Pending updates are performed in the following order:
1. System Updates
2. Add-in Installs
3. Scanner Settings

■ [Back] button

Returns to the Central Admin Console main window.
5.7 Updating the System
fi-6010N Network Scanner Operator's Guide
5
229