Configuring Ntp Server Settings - Honeywell HRGX45 User Manual

Configuring NTP Server Settings

You can configure a Network Time Protocol (NTP) server to ensure the accuracy of the system
date and time.
To configure NTP settings:
1.
2.
3.
4.
Go to Menu > Settings > Network > NTP.
Select the Enable NTP check box to enable time synchronization with an NTP server.
Configure the following settings:
• Interval (min)
• NTP Server
• NTP Port
Click Apply to save your settings.
Configuring Network Settings | 105
Sets the time interval, in minutes, between two synchronizing
actions with the NTP server. Select a value from 1 to 10080.
The default value is 60.
Enter the IP address of the NTP server.
Enter the port of the NTP server.
800-16694 - A - 04/2014