Calling Patterns
To call a pattern in live view mode:
1.
2.
3.
4.
5.
To call a pattern in the PTZ configuration interface:
1.
2.
Click on a channel to display the quick setting
toolbar (see
Quick Setting Toolbar, page
On the toolbar, click the PTZ Control button
In the on-screen PTZ control interface, under
Camera, select your PTZ camera from the list.
Click Pattern to view the list of patterns, and then
click the pattern you want to call.
Click the start button
to start the pattern. To
stop the pattern, click the stop button
Go to Menu > Camera > PTZ > More Settings (or click Configuration in the PTZ
control interface).
Select the pattern you want to call from the drop-down list, and then click the Run button
to call the pattern. To stop the pattern, click the Stop
Controlling a PTZ Device | 53
35).
.
.
button.
800-16694 - A - 04/2014