Configuring Ntp Server Settings; Figure 8-5 Ddns Settings Menu; Figure 8-6 Dyndns Settings - Honeywell Performance HRG4 User Manual

76 | Performance Series DVR User Guide
To set up DDNS:
1.
2.
3.
4.
5.

Configuring NTP Server Settings

A Network Time Protocol (NTP) Server can be set up on your HRG DVR to maintain the current
date and time.
www.honeywellvideo.com
 
Click Menu Settings
Select the Advanced tab.
Next to DDNS, click Set to enter the DDNS settings menu (see
Figure 8-5 DDNS Settings Menu
Select the DDNS check box to enable this feature.
Select the DDNS Type.
Three different DDNS types are selectable: IpServer, PeanutHull, and DynDNS.
• IpServer: Enter the Server Address for IpServer (see
• PeanutHull: Enter the User Name and Password obtained from the PeanutHull
website (see Figure 8-6).
• DynDNS: Enter the Server Address for DynDNS (members.dyndns.org). Under DVR
Domain Name, enter the domain obtained from the DynDNS web site. Then enter the
User Name and Password registered in the DynDNS network.
Figure 8-6 DynDNS Settings
Network to enter the Network Settings menu.
Figure 8-5).
Figure 8-5).