4.
In the KeyPoint window, configure the following settings:
• Preset
• Duration
• Speed
5.
Click OK to save the key point to the patrol.
6.
Repeat steps 3 to 5 to add more key points. To delete a key point from the list, click the
Clear button
next to the preset name.
Select the preset you want to assign to this key point.
Select the time, in seconds, that you want the camera to remain at this
key point.
Select the speed at which you want the camera to move to this key
point.
Controlling a PTZ Device | 49
800-16694 - A - 04/2014