Honeywell HRGX45 User Manual page 62

62 | HRGX DVR User Manual
To configure encoding parameters for substream:
1.
2.
3.
4.
5.
6.
www.honeywell.com/security
Go to Menu > Record > Encoding > Substream.
Select the camera you want to configure encoding parameters for.
Configure the following encoding parameters for substream:
• Stream Type
• Resolution
• Bitrate Type
• Video Quality
• Frame Rate
• Max. Bitrate Mode
• Max. Bitrate(Kbps)
To copy these settings to one or more additional cameras, click Copy to open the Copy to
window, select the camera(s) you want to copy the settings to, or click Analog to copy the
settings to all cameras, and then click OK.
Click Apply to save your settings.
To restore the current substream settings to the default parameters, click Restore.
Set the stream type to Video or Video & Audio.
Set the recording resolution to one of the following settings:
WD1, 4CIF, 2CIF, CIF, or QCIF.
Set the bitrate type to Variable or Constant.
Set the recording video quality. 6 levels configurable.
Set the recording frame rate.
Set the bit rate mode to General or Customize.
Select or customize the maximum bit rate for recording.