Honeywell HRGX45 User Manual page 86

86 | HRGX DVR User Manual
7.
8.
www.honeywell.com/security
c. Click the Handling tab to set the action(s) you want to occur when the alarm input
generates an alarm signal. Select the check box corresponding to the action(s) you
want to enable, and then click Apply to save your settings.
d. If applicable, select the PTZ Linking tab to set the PTZ linkage of the alarm input. Select
the preset, patrol, or pattern you want to call when the alarm input generates an alarm
signal, click Apply to save your settings, and then click OK to close the window.
To copy these settings to one or more additional alarm inputs, click Copy to open the
Copy Alarm Input to window, select the alarm input(s) you want to copy the settings to, or
click Alarm Input No. to copy the settings to all alarm inputs, and then click OK.
Click Apply to save your settings.