Honeywell HRGX45 User Manual page 91

c. Click the Handling tab to set the action(s) you want to occur when motion is detected.
Select the check box corresponding to the action(s) you want to enable, click Apply
to save your settings, and then click OK to close the window.
7. To copy these settings to one or more additional channels, click Copy to open the Copy
to window, select the channel(s) you want to copy the settings to, or click Analog to copy
the settings to all channels, and then click OK.
8. Click Apply to save your settings.
Configuring Alarm Settings | 91
800-16694 - A - 04/2014