Honeywell HRGX45 User Manual page 29

3. Click the Admin Password field to display the on-screen numerical keypad, enter your
DVR's admin password (the default admin password is 12345), and then click Enter.
4. If you want to create a new password, select the New Admin Password check box, enter
a new password in the New Password field, and then re-enter the new password in the
Confirm field.
5. Click Next to continue to the next screen.
6. Specify your DVR's network settings. If you want to configure the IP address, subnet
mask, default gateway, and DNS addresses manually, clear the Enable DHCP check box.
7. Click Next to continue to the next screen.
Getting Started | 29
800-16694 - A - 04/2014