Configuring Email Settings - Honeywell HRGX45 User Manual

Configuring Email Settings

You can configure email settings for sending notification messages when an alarm event or a
device exception is detected.
Before you begin, ensure that the DVR is connected to a local area network (LAN) that maintains
an SMTP mail server (see
also be connected to a local intranet or the Internet, depending on the location of the email
accounts you want to notify.
To configure email settings:
1.
2.
Note It is recommended that you set up a web-based email account for use only with
the DVR.
Configuring General Network Settings, page
Go to Menu > Settings > Network > Email.
Configure the following settings:
• Enable Server
Authentication
• User Name
• Password
• SMTP Server
• SMTP Port
• Enable SSL
(Optional) Select the check box to enable server
authentication. Clear the check box to disable it.
Sender's email address.
For example: my.hrgx.dvr@gmail.com
Password of sender's email account.
SMTP server address of sender's email account.
For example: smtp.gmail.com
The default TCP/IP port used for SMTP is 25.
Select the check box to enable SSL (if required by SMTP
server). Clear the check box to disable it.
Configuring Alarm Settings | 97
102). The network must
800-16694 - A - 04/2014