Table of Contents
Advertisement
3. Press SELECT.
The TV Setup menu is displayed.
4. Use the up and down keys to highlight the TV/Source that you want to modify.
5. Press SELECT.
The Setup (TV#) menu appears on your TV screen.
6. Use the up and down keys to highlight Emergency Alert Device Support.
7. Press the right or left keys to enable/disable Emergency Alert Device Support.
8. Press EXIT to return to the previous menu.
If Emergency Alert Device Support is enabled, the following occurs for all EAS (Emergency Alert System) broadcasts:
•
You hear a two-tone attention signal during Emergency Alert broadcasts.
•
The RG2200 automatically tunes your TV to the channel that is broadcasting the EAS message.
•
The emergency message appears at the top of your TV screen.
50
A FLASH FLOOD WARNING HAS BEE
Advertisement
Table of Contents
