"Write Your Remote Control and Other IDs Here" on page
ID on this page or on the back of the remote. If the ID has not been recorded, perform the following steps.
1. Press the SETUP button on the front panel of the RG2200. (See
and description of this button and other buttons on the RG2200s.)
The Gateway Menu screen will be displayed on your TV.
2. Use the down key on your remote control to move down to Remote Control Setup.
3. Press SELECT on your RG2200 or your remote control.
Remote Control Setup
Use EXIT to return to program viewing
13. Your NSP may have already recorded the Gateway's
"Using Your RG2200" on page 16
SEP 3 3:22 PM
, then press SELECT
for an illustration