Full Operating Checks; Check The Fireslide Control - Valor Dream Fireslid 9500433 Installer's Manual

Valor 600B610_01 7/12/00
Place two coals each side of the centre
7.4
loose coal. Make sure that they bridge the
space between the front and rear base
coals. See figure 18.
figure 18
Place a loose coal behind the central coal
7.5
in the front row central and resting on the
two peaks of the rear base coal. See
figure 19.
figure 19
Place two coals each side of the centre
7.6
loose coal and immediately behind the
front row of coals. See figure 20.
figure 20
Place two of the remaining coals each
7.7
side of the central peak at the rear of the
base coal and immediately behind the
second row of coals. See figure 21.
3:22 PM Page 12
INSTALLER GUIDE
figure 21

8.FULL OPERATING CHECKS

8.1
figure 22
8.1.1
Page 12
Check the control
The control position markings on the front
surround are shown in figure 22.
When first turned on from cold, the
flames will appear predominantly blue.
Please note that, when operating the fire
for the first time, some vapours may be
given off which could set off smoke
alarms in the vicinity. These vapours are
quite normal with new appliances. They
are totally harmless and will disappear
after a few hours use.
control
Make sure the slider button is at the off
position (at topmost position marked "O"
on the fascia).