Specifying When To Display The Pip - Polycom VSX Series Getting Started Manual

Specifying When to Display the PIP

© Polycom, Inc.
3. Scroll to Far Control of Near Camera and press
option.
4. Press Home to save your change and return to the Place a Call
screen.
Changing this setting takes effect immediately, even if a call is in progress.
Your system may be configured with specific default behavior for the PIP in
calls. Depending on your system configuration, you can show, move, or hide
the PIP, as needed after a call connects.
To specify when to display the PIP:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
4. Scroll to PIP, press
Select this setting...
Camera
Auto
On
Off
5. Press Home to save your change and return to the Place a Call
screen.
, and select one of these settings:
To show the PIP...
When you press any of the camera control
buttons.
On connection and when you pick up the
remote control.
On connection and during the call.
Only when you press
control.
C Y W
USTOMIZING OUR ORKSPACE
to enable the
PIP on the remote
35