Polycom VSX Series Getting Started Manual page 20

G S G
ETTING TARTED UIDE FOR THE
Showing Content with People+Content IP
16
VSX S
ERIES
To install the People+Content IP application on a laptop or PC:
1. On a laptop or PC with Windows XP or Windows 2000, open a web
browser and go to www.polycom.com.
2. Download and install the People+Content IP application from the
Polycom Resource Center.
To start showing content:
1. On the PC, start the Polycom People+Content IP application.
2. Enter the IP address of the video conferencing system and click
Connect.
3. Open the content you want to show, and do one of the following:
Click in People+Content IP.
Press Graphics on the video conferencing system's remote
control.
If you have content sources connected to your VSX system and you press Graphics on
the remote control, you are prompted to select the content source to use.
To stop showing content:
1. If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2. Do one of the following:
Click in People+Content IP.
Press Graphics on the video conferencing system's remote
control.
3. If others in the conference want to send content from the same VSX
system using People+Content IP, click Disconnect to disconnect from
the VSX system so that they may connect. Only one PC at a time can
be connected.
. . /
WWW POLYCOM COM VIDEODOCUMENTATION