Controlling What You Hear; Adjusting Volume; Muting The Microphone - Polycom VSX Series Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Controlling What You Hear

Adjusting Volume

Muting the Microphone

14
VSX S
ERIES
To enable automatic voice tracking to camera presets:
1. Press Near or
2. Press Auto until you see "Automatic Camera Tracking to Presets."
The near-site camera icon changes to
automatic voice tracking to camera presets is enabled.
To disable automatic voice tracking to camera presets:
>>
Press Auto until you see "Automatic Camera Tracking Off."
You can also turn off automatic tracking by using the remote to pan, tilt,
or zoom the camera.
Use the remote control to raise or lower the volume of the sound you hear.
Changing the volume affects only the sound you hear at your site.
To adjust the volume:
>>
Press Volume.
When the VSX 3000 system is in use for video conferencing, use the remote control to
adjust the volume. When the VSX 3000 is in use as a monitor for your PC, use the VOL
button on the front of the system to adjust the volume.
You can mute the microphone if you do not want the far site to hear you. For
example, you might mute the microphone if you want to speak to someone
privately.
To mute or unmute the microphone:
>>
Press Mute on the remote control.
For VSX set-top and component systems that use a Polycom microphone, you
can also mute the call by pressing
Far to choose the near-site or far-site camera.
on the microphone.
WWW
to let you know that
. . /
POLYCOM COM VIDEODOCUMENTATION