Polycom VSX Series Getting Started Manual page 31

© Polycom, Inc.
To use the chair control options when you are in a multipoint call:
1. On a PC, open a web browser.
2. In the browser address line, enter the system's IP address, for
example, http://10.11.12.13, to go to the video conferencing system's
web interface.
3. Click Place a Call.
4. Click Chair Control to go to the Chair Control screen.
The Chair Control option is only available when the system is in a multipoint call. It
is not available in cascaded multipoint calls.
5. Select a site from the list and then use the controls in the web interface
to perform one of these actions:
If you You can do this...
are...
Chair Pass chair controls to the selected
controller site
View the selected site's video. This
remains in effect until you choose
Stop Viewing Site or you release
chair control.
Return to viewing the video selected
by the chair or by the MCU
Send your site's video to the other
sites
Send the selected site's video to the
other sites
Remove the selected site from the
conference
Disconnect all sites and end the call.
Participant Request control of the conference
View the selected site's video. This
does not change what other sites
see.
Return to viewing the video selected
by the chair or the MCU
I M S
NCLUDING ULTIPLE ITES IN
By selecting...
Release Chair
View Site
Stop Viewing
Site
Make Me the
Broadcaster
Select
Broadcaster
Disconnect
Site
End
Conference
Acquire Chair
View Site
Stop Viewing
Site
C
ALLS
27