Polycom VSX Series Getting Started Manual page 13

© Polycom, Inc.
To select a near-site or far-site camera or other video source:
1. If you are in a call, press
near-site or far-site camera or other video source. The icon on the
screen indicates which you can select:
2. Press Camera on the remote control. Then press the number for
the camera or other video source you want to select at the near or far
site. For example, press 1 to select the main camera.
The image from the camera or video source you selected appears on the
screen.
To adjust a camera using the remote control:
1. Press Near or
camera.
2. Press the arrow buttons on the remote control to move the camera
up, down, to the left, or to the right.
3. Press Zoom to zoom out or in.
Near or Far to select either a
If you see this, you can control a
near-site camera or video source
If you see this, you can control a
far-site camera or video source
Far to select either a near-site or far-site
C W Y S
ONTROLLING HAT OU EE
9