Ending A Call With Audio-Only Participants; Streaming A Conference To The Web; Starting A Stream - Polycom VSX Series Getting Started Manual

Ending a Call with Audio-Only Participants

Streaming a Conference to the Web

Starting a Stream

© Polycom, Inc.
Your conference may include a mix of video participants and audio-only
participants. If an audio-only participant hangs up during the call, you need to
disconnect the call from the conference. This is the same as hanging up a
telephone receiver in a regular phone call.
To disconnect the audio-only call:
1. Press Hang Up on the remote control.
2. If the call is a multipoint call, select VTX Conference Phone from the
Hang Up screen to clear the audio line.
Even if you hang up the video call or the audio-only site hangs up, you still need to hang
up the audio-only call from your system. If you do not disconnect the audio-only call
from the VSX system, you will hear a tone from the telephone through the conference.
Your system may be configured to allow you to stream point-to-point or
multipoint calls to the web. When you stream a conference, any number of
others can watch the conference's live video or presentation using a web
browser.
Your system may be configured to allow you to make point-to-point or
multipoint calls available for others to view using a web browser. Users who
view the stream need to know the address of the video conferencing system
and the system's admin password (if any).
To stream a conference:
1. Select System from the Place a Call screen.
2. Select Utilities from the System screen.
3. Select Web Streaming from the Utilities screen.
4. Select the Start Streaming option to begin streaming.
You can start the stream before or during a video call.
S C
TREAMING A ONFERENCE TO THE
W
EB
33