Hummer H1 Service Manual page 88

____________________________________________________________________
®
Power Steering Pump and Bracket Removal
1. Remove bolts/nuts attaching pump mounting bracket to
block and cylinder head and remove pump and bracket as
assembly.
2. If pump requires service, remove pump attaching bolts and
remove pump from bracket (Figure 2-67).
MOUNTING BRACKET
PUMP PULLEY
Exhaust Manifold Removal
1. Loosen turbocharger left side inlet pipe flange clamps.
2. Remove left side inlet pipe.
3. Remove left side manifold attaching bolts and remove
manifold and gasket. Discard gasket (Figure 2-68).
4. Loosen turbocharger right side inlet pipe flange clamps.
5. Remove right side manifold bolts and remove manifold
and gasket. Discard gasket (Figure 2-69).
6. Remove inlet tube.
MANIFOLD BOLT (TYPICAL)
SHIELD
Figure 2-68: Left Side Exhaust Manifold Removal
05745159
POWER
STEERING
PUMP
Figure 2-67: Power Steering Pump and Bracket Removal.
DRIVER SIDE
EXHAUST MANIFOLD
SUPPORT BRACKET
PIPE
CLAMP
PASSENGER SIDE
EXHAUST MANIFOLD
Figure 2-69: Right Side Exhaust Manifold Removal.
Engine 2-51