Table of Contents
Advertisement
OPERATION
3-40
Mirage 22000/4000/6000User's Manual
reversed and/or upside down, See 2.6, Operating Orientation for an illustrated
explanation.
Language
Choose from English, French, Spanish, German and Italian language. The menus will
change immediately upon selection.
Menu Preferences
Use the options in this submenu to
adjust the appearance, content and/or
location of on-screen menus
displayed in presentation level.
MENU LOCATION —
Use the pull
down list to choose a pre-defined or
customized default location for the
display of on-screen menus.
To create a custom menu location,
choose a preset that is closest to the desired area. Then adjust the slidebars of
Horizontal Shift and Vertical Shift to move the menu to the desired location. To
prevent cropping of larger menus, avoid locations too close to a corner or edge.
HORIZONTAL SHIFT AND MENU SHIFT —
customized menu location.
DISPLAY CHANNEL LIST —
list whenever you press
with a list icon
in the Channel Setup menu. This option also enables on-screen
feedback when using the
dialog box while switching channels and sources during a presentation, do not enter a
checkmark.
NOTE: The Channel List and input dialog box cannot be hidden when a menu is
displayed.
DISPLAY SLIDEBARS —
current image whenever an adjustable parameter is selected directly with a key (the
option does not affect slidebars in menus) such as
"Display slidebars" is unchecked, these slidebars can still be accessed, but will be
hidden during adjustment.
DISPLAY ERROR MESSAGES —
detected in either the incoming signal or projector. Select "Screen" or "All" to see a
brief on-screen messages or select "RS232" to be see messages via RS232 and RS-
422 serial communication only. To disable error message display, select "Off".
LARGE MENU FONT —
Enter a checkmark to enlarge menus and their text. You may
have to adjust "Menu Location" to accommodate the increased menu area.
Communications
This submenu of the Configuration menu is fully described in a separate System
Communications subsection later in Section 3.
Figure 3.23. Menu Preferences Menu
Shift your menus as desired, creating a
Enter a checkmark if you want to see a scrollable channel
Chan
from your presentation. These channels must be marked
Input
key. If you prefer to hide the channel list and input
Enter a checkmark to superimpose a small slidebar over the
Choose in what way you want to be notified of errors
Pixel
,
Position
,
, or
Bright
. If
Hide quick links:
Advertisement
Table of Contents
