Mirage 2000 User Manual page 159

OPTIONAL INPUT MODULES
DVI Input Module
38-804635-xx
Digital HDTV Input Module
38-804611-xx
F-4
Mirag2000/4000/600000 User's Manual
'
The DVI Input Module can be installed in the projector to display digital video input
signals conforming to the DVI (Digital Visual Interface) standard (single-channel).
Features
◊
Supports Digital Visual Interface (DVI) single-channel
◊
Supports VESA Extended Display Identification Data (EDID)
◊
Provides an active-loop-through using a DVI connector (conforming to
the DVI Specification)
'
The Digital HDTV Input Module can be installed in the projector at
accepts a digital 4:2:2 component HDTV signal (YCbCr) via a single
connector. The signal can loop through the
(such as another projector). Inputs are 75
Features
◊
accepts a variety of digital HDTV 4:2:2 component signals (YCbCr), and de-
serializes into a parallel 20-bit 4:2:2 component signal (10 bits each for Y
and CbCr)
◊
SMPTE 292M compatible
◊
Two data rates: 1.485 Gb/sec or 1.485/1.001 Gb/sec.
◊
provides both a
◊
includes 4 status LEDs
SERIAL OUT
S
terminated.
SERIAL IN SERIAL OUT
and a
INPUT 2
SERIAL IN
BNC out to another device
BNC connector
, where it
BNC