Operation; Overview; Projector Basics - Mirage 2000 User Manual

3.1

Overview

3.2 Projector
Basics
Components / Features
This section explains how to use the projector once it has been installed. Please read
through these pages before using the projector for the first time. An understanding of
projector features and how to access them will help you to take full advantage of the
capabilities of the projector within minutes.
NOTE: Installation involves locating the projector and adjusting it for use at that
location. If you have not yet installed the projector, refer to Section 2, Installation
and Setup.
Most projector functions and adjustments are initiated via keypad commands that
either control the projector directly or activate a system of intuitive menus.
Collections of settings can be defined and retained in the projector's internal memory
as a custom channel, with up to 99 different channels possible.
Components and functions are illustrated below.
Figure 3.1. Basic Projector Components
'
ZOOM -
Accessed manually (or via the keypad if a motorized zoom lens is present),
the lens barrel of a zoom lens (optional) rotates to adjust the size of the image
without moving the projector. Minimum and maximum image sizes depend on which
zoom lens is installed — see Section 5, Specifications.
S e c t i o n 3

Operation

Mirage 2000/4000/6000 User's Manual
3-1