Mirage 2000 User Manual page 46

Volume
Vol
Non-functional.
Projector
Proj
Press Proj when you want to access a specific projector within a network or if you
simply need to see if the local projector is listening. The number appearing in the
"Enter Number" window indicates which projector is currently listening to
commands, and will match the projector number that has been defined in its
Communications menu.
The "Projector" checkbox (read-only) shows whether or not the projector physically
connected to a keypad is listening to commands from that keypad. A checkmark
means that connected projector is listening; if there is no checkmark, you are
communicating with a different projector.
To use a specific projector, enter the 3-digit number assigned to the projector you
want to use. Press
other than the one you are currently using, the checkmark will be deleted.
To broadcast to multiple projectors, press
projector number. Keypad commands will then affect all projectors present.
NOTES: 1) The "Broadcast Keys" option in the Communications menu must be
selected for only one (any) projector in a serial network. The keypad in use must be
OFF (disabled) for the remaining projectors. See 2.10. Keypad Protocols and
Conversion, and 3.7, Configuring System Parameters.
Pixel
Pixel
Press Pixel to access the pixel tracking and pixel phase double slidebar. Adjust pixel
tracking first: use
sampling clock to correct consistency of the image. For proper phase, use
OFF to increase or decrease pixel phase so that any shimmer disappears and the
image is stable throughout. See 3.6, Adjusting the Image (Size and Position
subsection) for a complete explanation of tracking and phase.
Position
Position
Position
Press to move the image using the double slidebar. At the slidebar, use
and to move the image left or right, use
down.
Lens
(OPTIONAL)
Lens
NOTES: 1) Requires a motorized lens. In non-motorized projectors, adjust the lens
manually for proper focus, zoom and offsets as described on page 2-2. 2) For full
details regarding use of motorized lens functions, refer to 2.8, Zoom, Focus and
Lens Offset.
Enter to select, press Exit
and to increase or decrease the frequency of the pixel
to cancel. If you switch to a projector
Proj and then Proj again without entering a
ON and OFF to move the image up or
Mirage 2000/4000/6000 User's Manual
OPERATION
ON and
3-9