Components; Purchase Record And Servicing - Mirage 2000 User Manual

INTRODUCTION
How The Projectors Work
1.2

Components

Difference Between Models
1.3 Purchase
Record and
Servicing
1-2
Mirage 2000/4000/6000 User's Manual
'
Mirage 2000/4000/6000 models accept data/graphics and video input signals for
projection on to front or rear flat screens. High brightness light is generated by an
internal Xenon arc lamp (500W in Mirage 2000, 700W in Mirage 4000, and 1200W
in Mirage 6000), then modulated by three DMD (digital micromirror device) panels
that provide digitized red, green or blue color information. Light from the "on" pixels
of each panel is reflected, converged and then projected to the screen through a single
front lens, where all pixels are perfectly superimposed as a sharp full-color 2D or 3D
image.
Mirage 2000/4000/6000 models include an infrared (IR) remote keypad, line cord, a
9/64" hex socket ball driver, and a User's Manual. Make sure that you have all these
items, and note that purchasers also receive a Warranty Registration Card–complete
this card and return it directly to the manufacturer as soon as possible.
'
The models are identical except for their power levels and lamp wattage.
Whether the projector is under warranty or the warranty has expired, Christie's
highly trained and extensive factory and dealer service network is always available to
quickly diagnose and correct projector malfunctions. Service manuals and updates
are available to service technicians for all projectors.
Should you encounter a problem with the projector and require assistance, contact your
dealer or Christie. In many cases, any necessary servicing can be performed on site. If you
have purchased the projector, fill out the information below and keep with your records.
Dealer Phone Number:
Projector Serial Number*:
Purchase Date:
Installation Date, if applicable:
* NOTE: The projector serial number is located on the projector's rear identification label
Figure 1.1. Components
Purchase Record
Dealer: