Mirage 2000 User Manual page 19

INSTALLATION AND SETUP
S-Video
2-16
Mirage 22000/4000/6000User's Manual
'
The video decoder input panel provides simultaneous connection of both a composite
INPUT 3
video source (
If connecting an S-Video source, use the 4-pin mini DIN connector or the Y and C
BNC connectors (luma and chroma) at
2.16.
NOTE: If you want to loop an S-video signal through to another projector or display
device, see Video Loop Through below.
) and an S-Video source (
INPUT 4–
Figure 2.16. Connecting S-Video
INPUT 4
).
do not use both as inputs. See Figure