Mirage 2000/4000/6000 User's Manual - Mirage 2000 User Manual

Serial Digital Input Module
38-804602-xx
Marquee
Case/Power Supply
38-801023-xx
38-801026-xx
'
The Serial Digital Input Module (SDI) can be installed in the projector at
where it accepts a serial digital 4:2:2 component video signal (YCbCr) via a single
SERIAL IN
BNC connector. The signal can loop through the
another device (such as another projector). Inputs are 75
SDI Features
◊
accepts serial digital 4:2:2 component video (YCbCr)
◊
provides both a
◊
includes status LEDs for signal and error
'
The Marquee Case/Power Supply enables you to use an analog input module as a
stand-alone interface. Two supplies are available: one for use with 120 volt line
voltage (38-801023-XX), and the other for use with 220 volt line voltage
(38-801026-XX). Both models include a 15 VDC, 500 mA AC adapter.
Marquee Case/Power Supply Features
◊
easy installation — no tools required
◊
the Marquee Case/Power Supply accepts the following input modules for
use with this projector: RBG500, RGB400 Active Loop-Thru, RGB400
Buffered Amplifier, Composite/S-Video, and PC Analog. Digital inputs
cannot be used.
◊
retaining clip to secure AC adapter
◊
non-slip feet
◊
supplied with 110 or 220 volt AC adapter
SERIAL IN SERIAL OUT
and a

Mirage 2000/4000/6000 User's Manual

OPTIONAL INPUT MODULES
INPUT 2
SERIAL OUT
BNC out to
S
terminated.
BNC connector
,
F-5