Table of Contents
Advertisement
highlight it and press
according to the numerous setup parameters defined for that channel.
NOTE:
Chan
key behavior during a presentation depends on whether or not the
Display Channel List option is selected in the Menu Preferences menu. You can
choose to use a scrollable list of channels when you press
enter the desired channel number "blind", i.e., without on-screen feedback. See
Menu Preferences later in this section.
Standby
Stby*
Press
Stby*
and hold for approximately 1 second to blank all display while keeping the
projector in a warmed-up and ready state. Or quickly press and release
follow immediately by
(useful if you are unsure of the present status). Note that the lamp and electronics
remain ON in standby mode, even though the image turns to black and most
functions are disabled. To leave standby press and hold
Or simply press
Exit
Menu
Menu
Press
Menu
to display the Main menu. A list of several options appears for access to
specific functions, such as Channel Setup or Image Settings. Press
remove all menus and return to presentation level.
Enter
Enter
Press
Enter
to select a highlighted item, to toggle a checkbox (checked vs. unchecked),
or to accept a parameter adjustment and return to the previous menu or image.
Exit
Exit
Press
Exit
to return to the previous level, such as the previous menu.
NOTE:
Exit
does not save changes within text editing boxes (including number
editing of a slidebars) or within pull-down lists. It acts as a "cancel" in these cases.
Arrow Keys
The arrow keys have a variety of functions depending on the situation. Some typical
uses are described below. See also Editing Text later in Section 3.
•
Use
or
adjustment (note the adjustment increments and range depend on the
parameter being adjusted).
•
Use
or
without having to display the list first
•
Use
or
down lists.
ON
Use the
ON
or
or
increase or decrease the value in the second (bottom) slidebar of a double slidebar.
OFF
You can also use
including an asterisk symbol—to ensure a toggle only in the desired direction. When
turning the projector on, for instance, you may be too far from the projector to know
whether it is really off or if the shutter is merely closed. If you press
for approximately 1 second in hopes of turning the projector on, the projector will
Enter
), the display will automatically change and update
ON
or
OFF
if you want to guarantee the correct toggle
or
Menu
.
to change a slidebar value—hold as desired for continuous
to change to a different option within a pull-down list
to jump between "pages", such as in Help or lengthy pull-
OFF
keys to navigate within a menu, pull-down list or text box, or to
ON
OFF
or
in conjunction with certain toggle keys—i.e., those
Chan
, or you may prefer to
Stby*
again (or use
Menu
Mirage 2000/4000/6000 User's Manual
OPERATION
Stby*
and
Stby*
OFF
).
again to
Power*
and hold it
3-7
Hide quick links:
Advertisement
Table of Contents
