Keypad Commands
5)
If you press a key while the projector is busy with another action, such as during
a power-up, the key press may not take effect.
When you turn on the projector it begins operating at presentation level, displaying
an image from the most recently used source signal. The projector temporarily leaves
presentation level whenever you use the keypad to work with control settings, display
menus, or on-line help. For example, pressing
menu — presentation level is no longer active, although the image still appears in the
background. Press
to presentation level.
'
Specific keypad commands are explained below:
Menu
again (or
Exit
) to return or leave the menu system and return
Figure 3.3. Keypad
Menu
after startup displays the main
Mirage 2000/4000/6000 User's Manual
OPERATION
3-5