Color Space - Mirage 2000 User Manual

Brightness
(
SHORT CUT:
Press
Bright
"Brightness" increases or decreases the amount of black in the image (0-100). Start
high and decrease so that dark areas do not become black (i.e., are "crushed").
Conversely, high brightness changes black to dark gray, causing washed-out images.
For best results, keep close to 50.
Pixel Phase
(SHORT CUT:
Press
Pixel
See description in Size and Position section, above.
Detail
(
SHORT CUT:
Press
"Detail" adjusts the sharpness of a video image. Use
is as sharp as desired, keeping in mind that any increase in detail above 3 (default)
will also introduce a certain degree of noise in the image. Set below 3 to filter the
signal and remove noise from a noisy source. Keep at 3 to apply no detail.

Color Space

This option determines how the color components of an input
signal are decoded for accurate color in the display. Selecting a
color space option is useful only for analog signals connected to
INPUT 1 INPUT 2.
or Although the color space for such a signal
is automatically determined by the projector, in some circumstances you may wish to
override this and manually set a different color space.
NOTE: For digital signals or for signals connected to
space function is entirely automatic and the pull-down list disabled.
•
RGB
Select unless you are using component video at
•
YPbPr (Video)
Select
•
YPbPr (HDTV)
Select
NOTE: When certain RGB signals are first connected, the projector may not initially
recognize them as RGB and will incorrectly decode their color information as YPbPr
(video). These signals can include:
•
RGB signals in NTSC, PAL, SECAM frequency ranges
•
Scan-doubled sync-on-green
•
Scan-quadrupled sync-on-green
For these signals, change the Color Space to RGB, which will define a new channel
for future use.
an
d adjust the slidebar.)
an
d adjust the slidebar.)
an
d adjust the slidebar.)
with a standard definition televised signal (SDTV)
with a high definition televised signal (HDTV).
Mirage 2000/4000/6000 User's Manual
OPERATION
and until the display
INPUT 3 INPUT 4
or , the color
INPUT 1 2.
or
3-29