Mirage 2000 User Manual page 51

OPERATION
Time-outs
The Global Icon
Using Slidebars and
Other Controls
3-14
Mirage 22000/4000/6000User's Manual
At the bottom of some menus, a line of hint text also appears.
'
Whenever the projector is not at presentation level, such as when there is a slidebar,
menu, message or test pattern displayed, you have limited time in which to make a
keypad entry before the projector returns to presentation level and the graphic
disappears. These time-outs vary depending on the current display, as shown in the
following chart:
'
In the menu system, settings that include this icon apply universally to any incoming
signal.
'
Most of the function menus allow you to change settings by using slidebars,
checkboxes, and pull-down lists. To select a slidebar, toggle a checkbox status, or
view a pull-down list, do one of the following within the function menu:
•
Enter the menu option number corresponding to the setting you wish to
change (for example, press
•
Or move the highlight to the desired parameter and press
•
Or move the highlight to the option desired and press
•
Or bypass menus entirely and use a single key to immediately access an
adjustment (note: applies only to options having their own key, such as Color,
Tint, Detail, Contrast, Brightness, Pixel and Position).
Once selected, change the setting as desired (see below) and press
return to the current function menu.
Slidebars in menus -
such as size or vertical stretch, appears to the left of its slidebar
icon. This number may express a percentage or specific units (such as pixels, degrees
Kelvin, etc.), depending on the option. Press
setting up or down—both the number and the length of the bar change accordingly
(for continuous adjustment, hold down the desired arrow key). Or press
activate a slidebar text box for specific number entry via the keypad, then press
or and Enter to save (or press
Figure 3.8. Accessing General Help Topics
TIME-OUTS
Slidebar (from pres.)
Slidebar (from menu)
Lamp Timer Msg.
Channel entry
Other
for Vertical Stretch in Size & Position menu).
The current value for a given option,
Exit to cancel).
5 seconds
15 minutes
30 seconds
5 seconds
15 minutes
Enter .
or
Enter
or to gradually adjust the
.
to save and
Enter to