Table of Contents
Advertisement
To switch from the host computer to a guest computer (X-Port 20 Option
Only)
Press the Display Source button once. If, while using the guest laptop, you need to access
programs or network resources available from the host computer, press the Display Source button
again. When you switch from source 1 to source 2, and then pause for at least 60 seconds, you'll
automatically return to source 1 when you next press the Display Source button. To switch from
source 1 to source 3, press the Display Source button once, wait just ten seconds (until the
source 2 LED stops flashing), and then press it again.
To switch from the host computer to a VCR or DVD player
Press the Display Source button once. Do not linger at source 2 for longer than 60 seconds.
NOTE for S-Video Use: You can't use the Display Source button to switch to a VCR or DVD
player connected by an S-video cable. You can only activate an S-video source with the projector
remote control. However, as soon as you activate the S-video source, the display LED for source 3
(VCR/DVD player) will light up in the Control Panel.
Using the SMART Board Interactive Whiteboard
Once SMART Board software is installed on the host computer, and the interactive whiteboard is
configured and oriented, you're ready to use the 2000i. To get the most from your interactive
whiteboard, you should have both the SMART Board tools and Notebook software open and
running.
SMART Board Tools
The SMART Board tools provide all the functionality beyond basic touch control and pen tray
button use. Specifically, the SMART Board tools provide you with annotation and tool-configuration
capabilities. It's important to note that the SMART Board tools must be running to use the pen tray
styluses and eraser. In other words, if you want to write on your interactive whiteboard with a pen
tray stylus, make sure the SMART Board icon appears in the system tray (Windows operating
system) or menu bar (Macintosh computer).
32
Display Source Button
LED Indicators of the
Current Display Source
Figure 36: Changing the Display Source
Figure 37: SMART Board Tools
2000I Installation Guide
Advertisement
Table of Contents
