Table of Contents
Advertisement
NOTE: You can't connect the audio cable from both a VCR and a DVD player using the RCA
jacks because the Connection Panel can only accommodate one external audio source that
uses RCA connectors at a time.
5. Connect the power cable to an available outlet or power bar (not supplied).
6. Turn on the projector.
7. Turn on the VCR/DVD player and press the Play button.
8. Press the Display Source button until you see the Source 3 LED illuminated.
Your video will automatically display on the screen.
Source 3 (VCR/DVD Player) LED
Figure 31: Source 3 LED and Display Source Button
9. Press the Display Source button twice to toggle between the video output from the VCR/DVD
player that you just installed back to the resident computer.
Connecting an External Sound System
To deliver preamplified (or low level) sound to an external room sound
system
Connect standard red and white RCA audio cables (not provided) from the RCA Audio inputs on
the external sound system to the two Audio OUT jacks on the rear of the 2000i. Keep your right
and left channel connections correct for stereo sound.
Figure 32: Connecting Audio Cables from an External Sound System
Display Source Button
C om p
u t e
r 2
A u x
i l i a r y
A u d
i o
A u d
i o
A u d
i o I n
O u t
2000i Installation Guide
Computer 2
Aux iliary
Audio
Audio
Audio In
Out
Connect red and white RCA audio
cables from external sound system
here
25
Advertisement
Table of Contents
