Table of Contents
Advertisement
As you maneuver the 3 mm. hex key through the access holes, watch it from the side to see
when it's engaged with the hex screw.
3. Slide the projector backward or forward to alter the image size.
4. When the image is a good size, tighten all four hex screws that you previously loosened.
14
Figure 18: Location of Two Access Holes at the Front of the Projector
Figure 19: Side View
2000I Installation Guide
Screen Removed for Clarity
Look here to see when
the hex key engages
with the screw
Advertisement
Table of Contents
