SMART Board 2000i Installation Manual page 6

Rear projection smart board 2000i
Hide thumbs Also See for 2000i:
Table of Contents

Advertisement

7. The 2000i uses digital cameras that are located inside the screen frame. Do not allow excess
glass cleaner to flow into the crack between the frame and the writing surface, because the
cleaner could damage these cameras.
8. Avoid setting up and using the 2000i in an area with excessive levels of dust, humidity or
cigarette smoke.
9. Avoid exposing the 2000i to extreme heat or cold. The operating temperature range is from
41°F to 85°F (5
storage range is from -4°F to 95°F (-20
10. Unplug the unit during electrical storms or if you won't use it for an extended period of time.
11. This product has a three-wire grounding-type plug, which will only fit into an AC grounding-type
power outlet. Make sure an AC socket outlet is near the 2000i and remains easily accessible
during use. If you are unable to insert the plug into the outlet, have your electrician replace the
obsolete outlet. Do not circumvent the safety features of the grounding-type plug.
12. Handle the power cord carefully and avoid excessive bending. Route the power cord so it's
unlikely to be walked on or pinched by items placed upon or against it. Do not modify the
power cord.
13. If you require replacement parts, ensure the service technician uses replacement parts that are
specified by SMART Technologies Inc., or parts with the same characteristics as the original.
iv
°
°
C to 29
C) with up to 80% humidity (non-condensing). The shipping and
Important Information
°
°
C to 35
C) with up to 80% humidity (non-condensing).

Advertisement

Table of Contents
loading

Table of Contents