Figure 34: Location Of The Height Finder On The 2000I; Figure 35: Adjusting Unit Height - SMART Board 2000i Installation Manual

Rear projection smart board 2000i
Hide thumbs Also See for 2000i:
Table of Contents

Advertisement

Turn the handle to adjust the top of the screen from a lower limit of 69" (175.3 cm) from the floor to
a maximum height of 83" (210.8 cm) from the floor. When you reach the top and bottom limits of
the adjustment range you can't turn the handle any further.
To gauge the height of the unit as you turn the height adjustment handle, or to adjust it to a
particular height, watch the height finder located on the side of the unit, just above the handle. The
height finder is also useful if you want to adjust the unit to a particular height.
NOTE: If the computer on the storage tray is unusually high, be careful not to lower the interactive
whiteboard on top of it.
To raise the screen
Turn the height adjustment handle away from you (clockwise motion) to raise the screen. The
maximum height is 83" (210.8 cm).
30

Figure 34: Location of the Height Finder on the 2000I

Height Adjustment
Handle

Figure 35: Adjusting Unit Height

2000I Installation Guide
Height Finder
Turn clockwise to raise the screen
Turn counter-clockwise to lower the screen

Advertisement

Table of Contents
loading

Table of Contents