SMART Board 2000i Installation Manual page 44

Rear projection smart board 2000i
Hide thumbs Also See for 2000i:
Table of Contents

Advertisement

CAUTION
Never touch the back of the screen or brush against it with your head while
you're examining internal unit components. If you do smudge this surface,
lightly spray alcohol-free glass cleaner onto a soft cloth and lightly dab the
affected area to remove the marks. Never apply isopropyl alcohol, water or
acetone, as these fluids will damage the diffusion coating and permanently
reduce the display quality.
To avoid an electric shock, do not remove any screws except the two lamp-
WARNING
case screws.
Pour éviter tout risque de choc électrique, ne retirez aucune vis, à l'exception
des deux vis d'accès aux lampes.
Para evitar descargas eléctricas, no quite ningún tornillo excepto los de las
dos lámparas.
Um einen elektrischen Schlag zu vermeiden, dürfen Sie mit Ausnahme der
beiden Lampengehäuseschrauben keine Schrauben entfernen.
感電の恐れがありますので、ランプ ケースの 2
つのねじ以外に、ねじは取り外さないようにしてください。
2000I Installation Guide
36

Advertisement

Table of Contents
loading

Table of Contents