Table of Contents
Advertisement
4. Use the supplied 7/16" nut driver to loosen and tighten the bolt inside the access hole. This
action adjusts the height of the small mirror that reflects the projector's beam of light to the
large rear mirror. Watch the vertical position of the image slide on the front of the screen as
you loosen and tighten the bolt, and adjust accordingly.
Installing the Videoconferencing/Laptop Shelf
The videoconferencing/laptop shelf can be positioned just above the height-adjustment handle (for
laptop use), or higher up on the frame (for use with a videoconferencing camera). You can also
install the shelf on either side of the unit.
To install the videoconferencing/laptop shelf
1. Remove the plastic hole covers at the location where you want to mount the shelf.
16
Videoconferencing
Height
Figure 22: Shelf Height Option
Figure 23: Removing the Hole Covers
2000I Installation Guide
Laptop Height
Advertisement
Table of Contents
