Motion Detection - Beward N1000 Operation User's Manual

Start time, End time: allows you to specify a time interval. The first field is for selecting an
hour (00 to 24); the second field is for selecting a minute (00 to 55 in increments of 5).
Days of the week area: the following options are available for each day of the week:
 Time interval: this is a drop-down list containing time intervals that were specified for
each day of the week. If no interval is specified, the drop-down list will be empty.
 [Add] button: click this button to add a time interval, which was specified in the [Start
time] and [End time] fields, to the schedule.
 [Delete] button: removes a time interval from the schedule.
For user's convenience, the intervals appear as a scale, where blue color means that no
interval is set for this period and red color shows the specified intervals.
NOTE:
User can specify only 5 intervals for each day of the week.
Use the same time schedule every day: applies the schedule that was specified for
Monday to the whole week.
NOTE:
Click [ОК] to save the current schedule.

7.5. Motion Detection

You can set up to 3 detection areas that may cross each other. Besides, you can adjust
threshold and sensitivity for each of these areas. If this option is enabled, it triggers an alarm after
motion is detected in any of these areas and allows reducing recorded data size. When motion
detection is triggered, the camera sends an e-mail notification or sends a file to e-mail or FTP (Pic.
7.14).
N1000 Operations User Manual
Chapter 7. SETTING: Advanced
65