Initialize - Beward N 13102 Operation User's Manual

6.5. Initialize

[Reboot]: click this button to restart the camera. The camera takes 1-2 minutes to restart. If
you click the [Reboot] button, the confirmation dialog box appears. The user will be prompted to
continue or cancel the reboot. Click [OK] to continue or click [Cancel] to cancel the reboot.
[Factory default]: click this button to reset the camera to factory defaults. After that, the
camera will restart. All settings including IP address and Date/Time will be reset to their defaults.
However, it is possible to leave date/time and IP address at their current values. To do so,
check the [TCP/IP] and [Date/Time] boxes in the [Restore all setting except] item.
Do not turn off power to the camera until the reboot is completed!
If you click the [Factory Default] button, the confirmation dialog box appears. The user will
be prompted to continue or cancel the reset to factory defaults. Click [OK] to continue or click
[Cancel] to cancel.
NOTE:
See the Appendix E for default values of some parameters.
Backup setting data: you can save the camera settings to a file. Click [Save] and specify
the path where you want to save the settings and enter the file name.
NOTE:
When specifying the path, check the permissions on a folder where you want to save a snapshot. If you do
not have the permissions, you cannot save snapshots there.
In Windows 7, you need to start Internet Explorer as an administrator to save records on your local HDD.
N13102 Operations User Manual
Pic. 6.7
Chapter 6. SETTING: System
29