Initialize - Beward N6603 User Manual

6.1.3. Initialize

[Reboot]: click this button to restart the camera. The camera takes 1-2 minutes to restart. If
you click the [Reboot] button, the confirmation dialog box appears. The user will be prompted to
continue or cancel the reboot. Click [OK] to continue or click [Cancel] to cancel the reboot.
[Factory Default]: click this button to reset the camera to factory defaults. After that, the
camera will restart. All settings including IP address, user name, and password will be reset to their
defaults. Do not turn off power to the camera until the reboot is completed!
If you click the [Factory Default] button, the confirmation dialog box appears. The user will
be prompted to continue or cancel the reset to factory defaults. Click [OK] to continue or click
[Cancel] to cancel.
NOTE:
See the Appendix E for default values of some parameters.
Backup setting data: you can save the camera settings to a file. Click [Save] and specify
the path where you want to save the settings and enter the file name.
NOTE:
When specifying the path, check the permissions on a folder where you want to save a snapshot. If you do
not have the permissions, you cannot save snapshots there.
In Windows 7, you need to start Internet Explorer as an administrator to save records on your local HDD.
Restore Setting: allows you to restore previously saved settings. Click [Browse] button. In
the appeared window select the required file by clicking your left mouse button on the name of the
N6603 Operations User Manual
Pic. 6.6
Chapter 6. SETTING: Basic
27