Gps/Wiegand - GeoVision GV-VS04H User Manual

4.2.3 GPS/Wiegand

You can select either G
enabled at the same time.
GPS Function
Note this function is only available for GV-VS04H
The GV-Video Server supports the Global Position System (GPS) for active v
tracking and location ve
display the average speed of a vehicle in live view.
To enable the GPS function, a GV-GPS Receiver or any GPS module s
RS-232 interface is requi
Auxiliary Device Connectors.
To enable the GPS function:
Select GPS Baud rate: Two baud rate options are available: 4800 and 9600. By
default the value is 9600.
Set GPS Update Frequency: Set the update frequency in seconds for GPS data.
Maximum length of the data to be saved after network connection is broken:
Specify the duration of GPS data to be saved in the storage device of GV-Video Server
PS or Wiegand function for use. The two functions cannot be
Figure 4-15
rification. You can track the vehicle location on Google maps and
red to connect to the GV-Video Server first. See Chapter 9
Administrator Mode
4
, GV-VS12 and GV-VS14.
ehicle
upporting UART or
59