Disabled
No warning message will appear when
attempts to access the boot sector or hard
disk partition table are made.
NOTE This function is only available with DOS and other
operating systems that do not trap INT13.
CPU Internal Cache
This option speeds up memory access. However, it depends on the
CPU/chipset design. The default setting is "Enabled". The "CPU
Internal Cache" item won't appear on the menu, when CPU doesn't
have a built-in internal cache.
CPU L2 Cache ECC Checking
When enabled, this allows ECC checking of the CPU's L2 cache.
By default, this field is "Enabled".
Quick Power On Self Test
This option speeds up Power on Self Test (POST) after you turn on
the system power. If set as Enabled, BIOS will shorten or skip
some check items during POST. The default setting is "Enabled".
Enabled
Disabled
First/Second/Third Boot Device
These items allow the selection of the 1
the system will search for during its boot-up sequence. The wide
range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI,
and CDROM.
Boot Other Device
This item allows the user to enable/disable the boot device not
listed on the First/Second/Third boot devices option above. The
default setting is "Enabled".
Phoenix-Award BIOS Utility
SBC81700 VIA V4 SBC User's Manual
Enabled
Enable cache
Disabled
Disable cache
Enable Quick POST
Normal POST
st
nd
rd
, 2
, and 3
devices that
31
Need help?
Do you have a question about the SBC81700 Series and is the answer not in the manual?