AXIOMTEK SBC81700 Series User Manual page 52

SBC81700 VIA V4 SBC User's Manual
All Modes
Monitor blanked when system enters any power saving.
Off
Video Off Method
This setting determines the manner in which the monitor is blanked.
Soft-Off by PWRBTN
This option only works with systems using an ATX power supply. It
also allows the user to define which type of soft power OFF
sequence the system will follow. The default value is "Instant-Off".
Instant-Off This option follows the conventional manner systems
perform when power is turned OFF. Instant-Off is a soft
power OFF sequence requiring only the switching of the
power supply button to OFF
Delay 4 Sec. Upon turning OFF system from the power switch, this
option will delay the complete system power OFF
sequence by approximately 4 seconds. Within this delay
period, system will temporarily enter into Suspend Mode
enabling you to restart the system at once.
Ac Loss Auto Restart
This setting specifies whether your system will reboot after a power
failure or interrupt occurs. Available settings are:
Off
Leaves the computer in the power off state.
On
Leaves the computer in the power on state.
Former-sts Restores the system to the status before power failure or
interrupt occurred.
46
Phoenix-Award BIOS Utility